|
Model
ACT-1B Panel Tachometer
The ACT-1B Series Digital Panel Mount/Bench Tachometers are
used to dis play RPM from a single pulse per
revolution ( Model
ACT-1B ) 10 pulses per revolution ( Model ACT-1B-10 ) or 60
pulses per revolution ( Model ACT-1B-60 ) The
units are powered
by either 115 or 230 Vac 50/60 Hz or an optional
12 Vdc. The ACT
1B Series has a Universal Input, accepting input
signals from optical
proximity, magnetic or laser sensors; direct TTL
or an extermal AC
source. The ACT-1B Series is primarily intended
for permanent
panel mount installation, and provides a 5 digit
LED display of rota
tional speed. All connections are made on the
rear of the rear
of the instrument with easily accessible screw
terminal connectors.
Individual input and output TTL jacks for powering sensors and daisy
- chaining multiple strobes
DB Plus, DA
Plus Tachometer mode for speed measurement up to
200,000 RPM using extemal sensors
All digital microprocessor controlled for rock steady. accurate
fiash
rates.
Kits include carry case and spare lamp
N.I.S.T. Certificate of Calibration included.
รายละเอียด |
|
Model ACT-2A Panel Tachometer |
MODEL |
ACT-2A |
ACT-3A |
ACT-3 |
Speed range |
5 RPM to 999,990
RPM |
Input Frequency
Range |
0.083 Hz to 250
KHz |
Totalizer/Counter |
1-99,999 Counts |
Input
Configuration Input Voltage Range |
Universal inputs:
1 up to 9,999 pulses pr revolution
Front panel push button programable
TTL input and 200 mV to 50V ac signals |
Recommended
sensor |
Remote Optical
ROS-5W Infrared
IRS-5WProximity
PS-11
Laser ELS-S-5WMagnetic
M-190W Mag/Amp
MT-190W |
Accuracy |
0.001% of reading |
Resolution |
Fixed Range Mode
Auto Range Mode 1 RPM ( 5-99,999 RPM ) Up to
0.0001 RPM
10RPM ( 100,000-999,990 RPM ) |
|
0.56 inch high
red seven segment LED |
Display Update |
0.5 second above
120 RPM |
Pulse Repeater
Output |
N/A |
Pulse Repeater
Output, 0-5 V TTL compatible
(0.5 millisecond width typical)
Pulses per revolutioequal pulses in per
revolution |
RS322C Interface |
N/A |
Bi-directional RS232 |
Analog Outputs |
N/A |
Simultaneous
Analog Output Panel programmable as either
high or Low, latching or nolathing
latching. Accuracy ± 0.1% of
setpoint. Hysteresis and low limit
lockout are programmable |
Alam Capability |
N/A |
Two alarm
setpoints, each front panel programmable as either
high or Low, latching or non-
latching. Accuracy ± 0.1% of
setpoint. Hysteresis and low limit
lockout are programmabl |
Alarm Outputs |
N/A |
From C relay
contacts, rated 1A at 115 Vac
|
Alarm Reset |
N/A |
Automatic
or manual reset
programmable from front panel
pushbuttons |
Scaling
Computation |
Programable
scaling 0.0001 to 999.9 Programmable from front panel pushbuttons |
Decimal Point |
Fixed or auto minimum recall from front
panel pushbuttons |
Memory |
Maximun and
minimun recall fron pane pushbuttons |
Dimensions |
1/8 DIN by 7" (
178) deepPanel Cut Out 1.74"(44) Hx 3.58' ( 91 ) W |
Input Power |
Must specify 115V
or 220/230/240V 50/60 Hz or 12 Vdc |
รายละเอียด |
|
Model
ACT-3 Panel Tachometer
Front panel programmable
The
Engine Tachometer is available with 12Vdc, 230Vac or 115 Vac power.
The ACT-3 Tachometer offers all the required output options
available for easy interfacing to your data acquisition systems.
Outputs include: 4-20 mA, 0-5V, TTL pulse, two alarm set points and
an RS232C bi-directional serial interface. The analog outputs offer
12 bit resolution which can provide extremely accurate and
repeatable readings. The operating range of the ACT-3 Tachometer is
5-999,990 RPM with an accuracy of 0.0015% + 1RPM.
รายละเอียด |
|
Pocket Laser Tach 200
The compact and versatile Pocket-Tachs are ideally are ideally
suited for non-contact contact and linear speed
measurements.
Pocket Laser Tach 200 ( PLT200 ) is a gigital battery-Powered
Portable optical tachometer, which operates up to
25 fett from
a
reflective target usins a laser light source. The ergonomic design
allows safe. direct ine-of sight viewing of both
the target and
the display at the same time, while providing a
non-slip rurface for
singlehand operation
Multi-Function
PLT200 is a 32 function Tachometer/Rtemeter, Totalizer/Counter
Timer( stopwatch ) which is programmable in both
English and
Metric rates. Support is built- in for both our
optional Remote
Sensors PLT200 has a TTL compatible Output to
trigger devices
like data collectors or stroboscopes. The KIT is
supplied complete
with a Remote Contact Assembly including concave
and convex
tips and a 10 cm linear speed wheel all in am
latching carrying case
รายละเอียด |
|
Phasar-Laser Tach Series
Phasar-Laser combines the accuracy and safety of a
non-contact
optical tachometer with the convenience and ease
of operation of
a
pistol grip instrument, housed in a pistol grip instrument, housed
in a rugged steel enclosure The tachometer
provides a convenient
visible
red laser for easy targeting along with a latching trigger for
hand held operation and a mounting bushing for tripod
mounted
use.
Phasar-Laser-R provides for optional sensor for difficult to
reach
locations in addition to the standard internal
measurement optics.
Features
Convenient pistol grip design
Rugged steel enclosure
Safe non-contact operation to 10 feet ( 3 m ) and 45 degrees
from reflective tape
On-target and low hattery indicators
Last measurement memory
รายละเอียด |
|
Tach-4A Portable Precision
Tachometer
Tach-4A innovated the combination of a high accuracy, range
Tacometer, multi-function Totalizer/Counter and
timer ( Stopwatch)
in
one versatile instrument Tach-4A is the word's most accurate
portable tachometer providing resolution of up to
0.0001 RPM.
Safe
non-contact operation up to 36 inches ( 91.44cm ) and
±45°
from perpendicular on a reflective tape target
Tach-4A is menu programmable from a six button membrane keypad.
A unique scaling feature allows triggering from one or
multiple
pulses per revolution as a tachometer, ratemter and
totalizer/
counter displaying data engineering units.
Tach-4AR is available with remote sensing capability. Remote
sensing capability capability. Remote sensors may
be optical infrared
magnetic or laser. See Page 7 for optional
sensors. The optional
0-5V TTL compatible Pulse Output ( PO ) is
supplied with a cable
for BNC interface to data acquistion equipment
รายละเอียด |